Author Topic: Safety Control Room  (Read 9990 times)

0 Members and 1 Guest are viewing this topic.

Offline Michael Gallagher

Safety Control Room
« on: May 08, 2010, 03:44 PM »
This amazing two deck space (Two and One Decks) remained mostly unaltered until QE2's retirement. Look at the control panels and look at the original cloth plans for the ship provided by the builder which were still in place!


Online Rob Lightbody

  • Administrator
  • Queens Grill Diner
  • *****
  • Posts: 12370
  • Total likes: 15952
  • Helping to Keep The Legend Alive
    • Rob Lightbody dot com
Re: Safety Control Room
« Reply #1 on: May 08, 2010, 05:09 PM »
Oh Wow!  I'm not sure I've seen photos of this room before!

How much did it have to change to take into account the 1987 refit?

Where do the very steep steps go to?
Passionate about QE2's service life for 40 years and creator of this website.  I have worked in IT for 28 years and created my personal QE2 website in 1994.

Offline Twynkle

Re: Safety Control Room
« Reply #2 on: May 08, 2010, 07:13 PM »
Thank you for posting these interesting images.
This looks as if it could have been a really important, and yet difficult space to work in.
Was the 4 hour watch ever shortened?
If there's anyone on the Forum who got to know it well - it would be really good to learn more!


« Last Edit: May 08, 2010, 07:38 PM by Twynkle »

Offline Beardy Rich

  • QE2 Crew member
  • Britannia Grill Diner
  • *****
  • Posts: 262
  • Total likes: 17
  • Engineering Department 1984-1988
Re: Safety Control Room
« Reply #3 on: May 08, 2010, 07:16 PM »
From memory the SCR remained virtually untouched during the 1986/87 refit Rob. There was a CCTV camera and a computer terminal added at a later date I believe.
The stairway leads up to One Deck level to a balcony with fire door leading to the space that used to be the above the original boilers, now occupied (I think) by the exhaust uptakes from the diesel engines.
There is/was a large tank up there too on one deck level but I cannot remember what it was.
Rich Drayson. Ex Snr Mechanic QE2 1984-1988.

Offline Beardy Rich

  • QE2 Crew member
  • Britannia Grill Diner
  • *****
  • Posts: 262
  • Total likes: 17
  • Engineering Department 1984-1988
Re: Safety Control Room
« Reply #4 on: May 08, 2010, 07:20 PM »
?
If there's anyone on the Forum who got to know it well - it would be really good to learn more! ;)

Rosie, I had the misfortune to be volunteered to work in that room... I hated it and after a short while, resigned from Cunard as a result.
Rich Drayson. Ex Snr Mechanic QE2 1984-1988.

Offline Michael Gallagher

Re: Safety Control Room
« Reply #5 on: May 08, 2010, 07:27 PM »
The One Deck level / balcony...

Offline Michael Gallagher

Re: Safety Control Room
« Reply #6 on: May 08, 2010, 07:30 PM »
And a few more.

Rob - there is also the view looking down the narrow steep stairs you asked about.

Offline Twynkle

Re: Safety Control Room
« Reply #7 on: May 08, 2010, 07:31 PM »
Hi Rich
Thanks - and hope it doesn't bring back too many bad memories...
It looks extremely cramped - and sure, there will have been lots of other places where there was no daylight, or space to move about easily etc  It reminds me of a very small intensive care unit/space - was it full of blinking lights and beeps?
And was it really close observation work? It must have demanded an incredible degree of concentration.
And 'being volunteered'  - that sounds a bit dodgy from an employment perspective!!
Sounds as if in 'being volunteered', there needed special terms and conditions - like one hour (at most) on watch and two off!!
Did anyone else work in there at the same time?
« Last Edit: May 08, 2010, 08:44 PM by Twynkle »

Offline Beardy Rich

  • QE2 Crew member
  • Britannia Grill Diner
  • *****
  • Posts: 262
  • Total likes: 17
  • Engineering Department 1984-1988
Re: Safety Control Room
« Reply #8 on: May 08, 2010, 09:50 PM »
Before the 1986/87 refit, watchkeepers did a four-on eight-off shift rota. This changed afterwards with the appointment of a new Chief Engr so all the watchkeepers now did a ten hour day. I seem to remember that this wasn't popular.
The extra two hours were spent on various tasks, usually in the machinery spaces, however my 'overtime' was spent learning about the workings of the SCR. Nobody asked me if I'd like to do this... it was just assumed that I'd do it I think.
Anyway, after several periods in there, there was a crew change and I was posted to the SCR on watches. This was solitary work and I found it quite nerve racking. The main work involved fuel oil and salt water ballast transfers between tanks. Also heating steam had to be switched on to various fuel oil tanks to facilitate ease of transfer by pump.
As well as this, various other tasks were done with the Officer Of the Watch on the bridge phoning down asking to right the ship if needed, taking fresh water tank readings etc etc... I've forgotten some of the things we needed to do but a lot of it also involved monitoring various systems - fire doors, WTD's etc. Such was the nature of the job that  2 ex-smokers I knew started smoking again. Quite a stressful job.
I tendered my resignation soon afterwards and despite reassurances from the First Engr that I'd "only have to do one more trip", I'd already had enough and left the ship.
Rich Drayson. Ex Snr Mechanic QE2 1984-1988.

Offline Bob C.

Re: Safety Control Room
« Reply #9 on: May 09, 2010, 07:08 PM »
On my iPhone and out of town so I am limited in what I can copy/paste for photos. But follow this link to see the control room in 1969. http://m.flickr.com/#/photos/33120597@N03/3405747677/

Back home and back proper to computer access.  Here's the photo referred to above:

As an aside, this space is referred to as Damage Control or DC Central in the US Navy and has many parallel duties as the SCR onboard QE2.
« Last Edit: May 11, 2010, 01:58 AM by Bob C. »

Online Isabelle Prondzynski

Re: Safety Control Room
« Reply #10 on: May 09, 2010, 09:38 PM »
This amazing two deck space (Two and One Decks) remained mostly unaltered until QE2's retirement. Look at the control panels and look at the original cloth plans for the ship provided by the builder which were still in place!


Where would this have been in relation to the passenger spaces on One and Two Decks? Amazing to see this place that I never even dreamt of!

Offline Beardy Rich

  • QE2 Crew member
  • Britannia Grill Diner
  • *****
  • Posts: 262
  • Total likes: 17
  • Engineering Department 1984-1988
Re: Safety Control Room
« Reply #11 on: May 09, 2010, 11:06 PM »
Where would this have been in relation to the passenger spaces on One and Two Decks? Amazing to see this place that I never even dreamt of!

Has anyone a set of deck plans they could post?
Rich Drayson. Ex Snr Mechanic QE2 1984-1988.

Online Isabelle Prondzynski

Re: Safety Control Room
« Reply #12 on: May 10, 2010, 11:34 AM »
Has anyone a set of deck plans they could post?

Rich, you might like to have a look in our QE2 Deckplans topic, to see whether one of those mentioned there might suit for the explanation :

https://www.theqe2story.com/forum/index.php/topic,147.0.html

Online Rob Lightbody

  • Administrator
  • Queens Grill Diner
  • *****
  • Posts: 12370
  • Total likes: 15952
  • Helping to Keep The Legend Alive
    • Rob Lightbody dot com
Re: Safety Control Room
« Reply #13 on: May 10, 2010, 12:36 PM »
I believe it was adjacent to the Pursers office, wasn't it?  In fact I think you could walk through from the back of the pursers office to it, couldn't you?
Passionate about QE2's service life for 40 years and creator of this website.  I have worked in IT for 28 years and created my personal QE2 website in 1994.

Offline Beardy Rich

  • QE2 Crew member
  • Britannia Grill Diner
  • *****
  • Posts: 262
  • Total likes: 17
  • Engineering Department 1984-1988
Re: Safety Control Room
« Reply #14 on: May 10, 2010, 01:33 PM »
Hi Isabelle, thanks for the link. Unfortunately, the plans are not of sufficient detail to see where the SCR is. It's amazing how quickly you forget things... for all the time on the ship, I cannot remember exactly where the SCR is. I know it's aft of 'C' stairway and quite possibly 'D' stairway?

Rob, I don't think you could access it directly from the pursers office... at least not whilst I was onboard. I cannot imagine why this would ever be necessary. The only 2- deck access was from the main corridor on the port side 2-deck. The other access was on 1- deck level to/from the machinery spaces.
Rich Drayson. Ex Snr Mechanic QE2 1984-1988.